Concrete is strong, but it is not perfect.
Over time, most concrete will crack. However, not all cracks mean failure. The key is understanding concrete cracking causes and knowing which ones signal real problems.
For commercial sites, roadways, and structures in Mississippi, cracking often points back to how the project started—not just how it looks today.
At Phillips Contracting, we focus on building concrete that performs long-term. That starts with understanding what causes cracks and how to prevent them.
Why Concrete Cracks in the First Place
Concrete cracks because it cannot stretch.
When it shrinks, moves, or takes on stress, it relieves that stress by cracking.
The Main Causes Include:
- Shrinkage during curing
- Soil movement
- Heavy loads
- Temperature changes
- Water-related issues
Because of these factors, cracking is common. However, proper construction controls how and where those cracks occur.
1. Shrinkage During Curing
One of the most common concrete cracking causes happens early.
What Happens
As concrete cures, it loses moisture and shrinks. If crews do not control that shrinkage, cracks will form.
What It Looks Like
- Thin surface cracks
- Random patterns
- Early appearance after installation
These are often called concrete shrinkage cracks.
How to Prevent It
- Use proper curing methods
- Control moisture loss
- Install control joints
When crews plan for shrinkage, they can control where cracks occur.
2. Poor Site Preparation
Many cracking issues start below the surface.
What Happens
If the base is weak or uneven, the concrete will settle over time.
Signs
- Uneven slabs
- Cracks that follow settlement patterns
- Sections dropping or shifting
Because of this, site prep plays a major role in concrete durability Mississippi projects depend on.
How to Prevent It
- Proper grading
- Soil stabilization
- Thorough compaction
Strong concrete starts with a strong foundation.
3. Excess Water in the Mix
Adding too much water may make concrete easier to work with, but it weakens the final product.
What Happens
- Reduces strength
- Increases shrinkage
- Leads to more cracking
How to Prevent It
- Use the correct water-to-cement ratio
- Follow proper mix design
- Avoid on-site adjustments that weaken the mix
Good mix control reduces long-term problems.
4. Temperature Changes
Concrete expands and contracts with temperature.
In Mississippi
- Hot summers cause expansion
- Cooler periods cause contraction
Over time, this movement creates stress.
What It Leads To
- Cracking at weak points
- Joint failure if not designed properly
How to Prevent It
- Install expansion and control joints
- Design for temperature movement
- Use proper spacing between joints
5. Heavy Loads and Traffic
Concrete must match its intended use.
What Happens
If loads exceed design capacity:
- Cracks form under stress
- Surface may break down
- Structural damage can follow
Common Areas
- Industrial yards
- Loading docks
- Roadways
How to Prevent It
- Design for expected loads
- Use proper thickness
- Reinforce where needed
6. Water and Drainage Issues
Water causes more problems than most people expect.
What Happens
- Water gets under the slab
- Soil shifts or erodes
- Concrete loses support
Results
- Cracking
- Settlement
- Long-term structural damage
How to Prevent It
- Plan drainage from the start
- Keep water moving away from slabs
- Maintain surrounding areas
This connects directly to many why does concrete crack situations.
Are All Cracks a Problem?
Not all cracks require major repairs.
Minor Cracks
- Thin
- Stable
- Not spreading
These are often cosmetic.
Serious Cracks
- Wide or growing
- Uneven edges
- Associated with settlement
These require attention and possibly concrete slab cracking repair.
How to Prevent Concrete Cracking
You cannot eliminate all cracking, but you can control it.
Key Prevention Steps
- Prepare the site properly
- Use the right concrete mix
- Control curing conditions
- Install control joints
- Design for loads and movement
- Plan for drainage
When crews follow these steps, they reduce the risk of major issues.
What Phillips Contracting Focuses On
At Phillips Contracting, we focus on preventing problems before they start.
We:
- Evaluate site conditions
- Build strong, stable bases
- Use proper mix designs
- Plan for drainage
- Install joints correctly
As a result, we deliver concrete that performs over time.
Real-World Example
We often see slabs where:
- Surface cracks appear early
- Water gets underneath
- Soil shifts
- Cracks widen and spread
At that point, repairs become more involved.
However, proper prep and drainage would have prevented most of the issue.
Bottom Line
Concrete cracking happens—but not all cracking is the same.
The key is understanding:
- What causes it
- When it matters
- How to prevent it
When you control the process from the start, you control the outcome.
Get It Built Right the First Time
If you’re planning a concrete project in Columbus, Tupelo, or surrounding areas, Phillips Contracting can help.
We focus on the details that prevent cracking and ensure long-term performance.

